home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Libris Britannia 4
/
science library(b).zip
/
science library(b)
/
COMMUNIC
/
2056.ZIP
/
MSK313.ZIP
/
NETWORKS
/
PKTADDR.DOC
< prev
next >
Wrap
Text File
|
1993-06-27
|
652b
|
13 lines
PKTADDR is a small program that you can use to find out the hardware address
of your network board if you have a packet driver loaded for the board. Just
type:
pktaddr 0x60
at the DOS prompt. This assumes that the packet driver is using interrupt 60
hex, which is the most commonly used address. If your network has a BOOTP
server, you can report the hardware address to your network manager so your PC
can be entered in the BOOTP table. This allows MS-DOS Kermit to obtain all
the necessary TCP/IP parameters from the BOOTP server, provided you have told
MS-DOS Kermit (e.g. in your MSCUSTOM.INI file) to SET TCP/IP ADDRESS BOOTP.